Home > News > Content
Related Questions And Solutions For Silicone Rubber Products
Aug 23, 2017

     Silicone rubber products are silicone and rubber as the main raw materials production of various silicone rubber products activities, silicone rubber products and people's lives are closely related, remote control, keyboard, POS, scanners, mobile phones, electronic dictionaries, mobile phone sets and so on are related to silicone rubber products. Silicone rubber products are based on methyl vinyl silicone rubber, adding a variety of fillers (reinforcing agent, heat-resistant agent, modifier, etc.) by mixing, book, filtration, sulfur, molding, extrusion, bonding and other production processes.Silicone Rubber Products
     Why the mold silicone rubber will appear dry in the phenomenon of the table? Mold Silica Gel is a condensation-type silica gel, it is by absorbing the moisture in the air and curing, silica gel in the process of making, the water steamed dry, and did not adjust to the amount of water, will appear in the table dry phenomenon. Solution: This phenomenon does not belong to product quality problems, but because there is no control of water, improve the storage period of silica gel, shelf life will appear a long time, as long as the use of silica gel, the appropriate amount of 0.05% water, stirring evenly can solve some situation.Silicone Rubber Products
    Why the mold silicone rubber will be the phenomenon of poor tension? Because the customer in the process of making molds, in order to reduce the viscosity of silica gel, make silica gel easy to operate and in a large number of silica gel added silicone oil, this will make the silica gel become very soft, resulting in tensile, tearing strength, reduce the tension of the phenomenon, resulting in mold is not durable, short service life, the number of times less.Silicone Rubber Products
    Why silicone rubber will appear to run oil condition? Mold silicone itself will not take oil, the emergence of oil is because of the operation of the complex silicone oil (silicone oil and white mineral oil complex), because the white mineral oil is petrochemical products, not silicone oil. Why the mold will produce not acid and alkali, anti-aging phenomenon? In the production of silicone mold, it is recommended that customers do not add any silicone oil, if necessary, the amount of silicone oil added not more than $number. Because the addition of silicone oil too much will damage the molecular weight of silica gel, so the mold will produce no acid and alkali, anti-aging phenomenon.Silicone Rubber Products